The adjustment of idle speed of electronic fuel injection diesel engine is a meticulous and important process, which directly affects the smooth operation and fuel economy of the engine. The following are the detailed steps for adjusting the idle speed of an electronic fuel injection diesel engine:

1、 Preparation work

Ensure engine condition: First, start the engine and let it run to normal operating temperature. This can usually be determined by observing whether the fan starts to rotate. When the fan starts to rotate, it indicates that the engine has reached the appropriate operating temperature.

Turn off non essential equipment: To ensure safety and reduce interference, it is necessary to turn off all non essential electrical devices and air conditioning. At the same time, unplug the cable plug of the electric fan to prevent injury caused by sudden rotation of the fan during adjustment.

2、 Adjust idle speed

Initial adjustment of idle speed: After restarting the engine, first adjust its idle speed to below 950r/min. This step is to ensure that the idle speed is not too high, laying the foundation for subsequent fine adjustments.

Calibrate ignition angle: While adjusting the idle speed, it is necessary to calibrate the ignition angle to the standard range (usually 20 °± 1 °). The correctness of ignition angle is crucial for the stable operation of the engine.

Fine adjustment of idle speed: Use the idle adjustment screw to finely adjust the idle speed until it stabilizes within the range of 850 ± 50r/min. During the adjustment process, it is necessary to maintain a stable operating speed to avoid unnecessary damage to the engine.

3、 Using a speed regulator to fine tune

Understand the type of governor: The diesel engine governor is a key component for adjusting idle speed, and it is usually divided into two types: bipolar and full range. Although the designs are different, both are equipped with the common component of a flying hammer.

Fine tuning idle speed: By adjusting the adjusting nut on the flying hammer, the idle speed can be effectively increased or decreased. This step requires careful operation, as excessive adjustments may have adverse effects on engine performance.

4、 Precautions

Safety first: Throughout the entire adjustment process, it is essential to ensure safety. Especially when dealing with components such as electric fans, it is important to prevent them from suddenly starting and causing injury.

Professional operation: Although the above steps provide basic idle adjustment methods, practical operation still requires certain professional knowledge and experience. For users who are not familiar with such operations, it is recommended to seek the help of professionals.

Regular inspection: After the idle adjustment is completed, the running status of the engine should be checked regularly to ensure that the idle is stable and meets the requirements. If any abnormalities are found, they should be adjusted or repaired in a timely manner.

In summary, adjusting the idle speed of an electronic fuel injection diesel engine is a process that requires careful attention and professional knowledge. By following the correct steps and methods, the stable operation and fuel economy of the engine can be ensured.